€2,300.00 – €2,940.00 ex. VAT
Super-insulated 75, 300 or 500 litres multifunctional
tanks for Heating and Domestic Hot Water
The complete heating system for your home.
ES Multi-function tank is a part of a total solution for a system for domestic hot water and residential heating. The system has connection possibilities for several different energy sources and in this way becomes the hub of the house’s heating system. The multi-function tank can be used as a stand-alone hot water heater or combined with for example pellet stoves, heat pumps and water-jacketed wood stoves. The flexibility allows the system to be gradually expanded and adapted for future needs.
The domestic hot water can be preheated or heated to a maximum via the stainless-steel coils inside the tank. This solution means that the hot water is not buffered in the tanks but is heated directly through the coils. In this way, the temperature inside the boiler can be lowered which reduces the total energy consumption. If there is an increased need for domestic hot water, the tank can be supplemented with a heat pump, solar collectors, or other heat sources. Through the tank’s various coils, you get an extremely cost-effective heating system that includes domestic hot water and house heating. An existing boiler can be used as backup capacity by being docked through the many connection options.
Thermostatically controlled electric cartridge
The multi-function tanks (except MWT 75) has a thermostatically controlled electric heater of 3 kW with control from 30-75 ° C, which increases the water temperature. The electric cartridge, located in the upper part of the tank, operate independently of other heat sources that are connected to the tank and is a backup which ensures that the temperature at the top of the tank is high enough to supply domestic hot water. However, the electric cartridge at the top of the tank is not designed to cover the entire heating needs of your system. The system must be supplemented with an external heat source such as a heat pump, solar collector, or existing electric or oil boiler for the total heat demand of the house.
R50 sockets for additive heating
In addition, all tanks have the possibility of connecting large-capacity immersion heaters, which ensures the heating demand when the house heating is at peak load. ES Multi-function tanks have one (MWT 75 and MWT300), alternatively two (MWT500), strategically placed extra R50 socket for the immersion heater in the tank, where you can insert additional immersion heater(s) up to 18 kW / piece if existing heat sources do not meet the total heat demand of the house and more capacity is desired. The tank’s various connection possibilities make it possible to combine with heat pumps for high-temperature systems.
Temperature diversion plates increase the effect
ES Multi-function tanks have built-in diversion plates that separate the water and enable two different temperatures. For example, when underfloor heating is connected to the lower part of the tank, the water is not heated to a higher temperature than is required to maintain the desired room temperature.
ES Multi-function tanks are made of stainless steel which keeps the system clean, provides high efficiency and extends the life of the system. ES Multi-function tanks are approved as domestic hot water heaters. The corrugated stainless-steel coils provide optimum heat exchange between the accumulator volume and hot water or added solar energy. This means that the stored energy in the tank is efficiently transferred to the tap hot water.
For optimum flow and when connecting high power heat sources, all connections to spirals and water volume are of 1″ type, MWT 500C has 2” connectors.
|MWT 300.4-3H||MWT 500.4-3H||MWT 500.C1|
|Max water pressure||10 bar|
|Max water temperature||95°C|
|Volume||300 L||500 L||500 L|
|Height||1 560 mm||1 850 mm|
|Diameter||630 mm||700 mm|
|Diversion plate||Yes, 960 mm from bottom||Yes, 1 145 mm from bottom|
|Tank material||Stainless steel 304|
|Coil material||Stainless steel 316|
|Thermometer||Yes, 1 in top and 1 in bottom|
|Insulation||100 mm Polyurethane||70 mm Polyurethane|
|R50-sockets for electric heater||1||2||2|
|Internal electric heater||3 kW||3 kW||3 kW|
|Heat system connectors,||8 pcs, 1″ female||8 pcs, 1″ female||8 pcs, 2″ female|
|Shower coil connectors||4 pcs, 1″ female||4 pcs, 1″ female||4 pcs, 1″ female|
|Solar coil connectors||2 pcs, 1″ female||2 pcs, 1″ female||2 pcs, 1″ female|
|Drainage, magnesium rod & expansion tank connector||3/4″||3/4″||3/4″|
|Weight||95 kg||101 kg||101 kg|
|Shower coil 1||20 meter, 22 mm||20 meter, 22 mm||20 meter, 28 mm|
|Shower coil 2||20 meter, 22 mm||20 meter, 22 mm||15 meter, 25 mm|
|Solar coil||10 meter, 22 mm||15 meter, 22 mm||15 meter, 28 mm|